Panel key stuck. A key on the operation panel is being read as pressed all the time.
Shown on Brother machines including 311H, 311HN, 341H, 342G, 430D, 430F, 430FX, 430HX, 438F, 6200A, 7000DD, 7100A and others.
What to check
- Check the panel sheet for a stuck or over-sensitive key and connector P3 (PANEL) on the main board.
Switch the machine off before touching any connector. If the code comes back after these checks, the fault is usually in the control boxes, PCBs and sensors.
Request a repair for this error or WhatsApp the code and your model to +91-9643480908 (Monday to Saturday, 10:00 AM to 8:00 PM (closed Sunday)).
Source
Summarised by Shankar Sewing from the BAS 311H SERVICE MANUAL (page 138); BE 438F SERVICE MANUAL (page 161); HE 800B SERVICE MANUAL (page 139); HE 800B instruction manual (page 61); S 6200A instruction manual (page 67). The manual has the complete procedure and connector numbers for your exact model.
Other Brother error codes
E010 Stop switch pressed in standby · E015 Stop switch held at power-on · E016 Stop switch connection fault · E050 Head tilted when the treadle was pressed · E051 Head tilted while sewing · E055 Machine head switch position · E111 Needle-up stop position not reached · E130 Motor stopped / synchroniser fault · E131 Motor encoder signal fault · E132 Blown fuse on the motor PCB · E133 Motor PCB or upper-shaft motor fault · E150 Motor overheating · all Brother codes
Frequently asked questions
What does Brother error E065 mean?
Panel key stuck. A key on the operation panel is being read as pressed all the time.
How do I fix Brother error E065?
Check the panel sheet for a stuck or over-sensitive key and connector P3 (PANEL) on the main board. If the code stays, the fault is usually in the control boxes, PCBs and sensors.
Which Brother machines show E065?
In the manuals we have read, E065 appears on 311H, 311HN, 341H, 342G, 430D, 430F, 430FX, 430HX, 438F, 6200A and other models.