Write error on external media. The machine could not write data to the USB drive or card.
Shown on JUKI machines including AMS-210E, AMS-210EN, AMS-221EN, AMS-224EN, AMS-251, AP874, AP876, APW-895N, APW-896N, DDL-9000CF, DDL-9000CS, DLU-5494N and others.
Switch the machine off before touching any connector. If the code comes back after these checks, the fault is usually in the control boxes, PCBs and sensors or servo motors.
Request a repair for this error or WhatsApp the code and your model to +91-9643480908 (Monday to Saturday, 10:00 AM to 8:00 PM (closed Sunday)).
Summarised by Shankar Sewing from the PS-700 instruction manual (page 66); AMS-224EN instruction manual (page 97); AMS-210EN instruction manual (page 109); AMS-221EN instruction manual (page 96); AMS-251 instruction manual (page 105). The manual has the complete procedure and connector numbers for your exact model.
E007 Motor overload · E011 External media not inserted · E012 Read error on external media · E015 Sewing area exceeded · E016 External media full · E019 File size over · E032 File not compatible · E302 Machine head tilt detected · E303 Main shaft Z-phase sensor error · E703 Panel connected to the wrong machine · E704 System version mismatch · E730 Motor encoder error (A/B phase) · all JUKI codes
Write error on external media. The machine could not write data to the USB drive or card.
Remove write protection, free up space, or use another drive. On some models the same code means a main-shaft motor encoder fault: check the encoder cable at the control box. If the code stays, the fault is usually in the control boxes, PCBs and sensors or servo motors.
In the manuals we have read, E013 appears on AMS-210E, AMS-210EN, AMS-221EN, AMS-224EN, AMS-251, AP874, AP876, APW-895N, APW-896N, DDL-9000CF and other models.