Machine head tilt detected. The head-tilt safety switch is open. Either the head really is tilted back, or the switch, its cable or its connector on the board is faulty.
Shown on JUKI machines including 910N, AMS-210E, AMS-210EN, AMS-221EN, DDL-8700B, DDL-9000CF, DDL-9000CS, DDL-900A, DLU-5494N, DP-2100, LBH-1790A, LK-1900A and others.
What to check
- Put the head back upright and reset.
- If it still shows with the head upright, check the safety switch, its cord and the connector on the control board (CN67 on the LK-1900A INT board).
Switch the machine off before touching any connector. If the code comes back after these checks, the fault is usually in the control boxes, PCBs and sensors.
Request a repair for this error or WhatsApp the code and your model to +91-9643480908 (Monday to Saturday, 10:00 AM to 8:00 PM (closed Sunday)).
Source
Summarised by Shankar Sewing from the LK-1900A engineer manual (page 108); SC 910N instruction manual (page 104); DDL-8700B instruction manual (page 50); DDL-9000CF instruction manual (page 72); DDL-9000CS instruction manual (page 57). The manual has the complete procedure and connector numbers for your exact model.
Other JUKI error codes
E007 Motor overload · E011 External media not inserted · E012 Read error on external media · E013 Write error on external media · E015 Sewing area exceeded · E016 External media full · E019 File size over · E032 File not compatible · E303 Main shaft Z-phase sensor error · E703 Panel connected to the wrong machine · E704 System version mismatch · E730 Motor encoder error (A/B phase) · all JUKI codes
Frequently asked questions
What does JUKI error E302 mean?
Machine head tilt detected. The head-tilt safety switch is open. Either the head really is tilted back, or the switch, its cable or its connector on the board is faulty.
How do I fix JUKI error E302?
Put the head back upright and reset. If it still shows with the head upright, check the safety switch, its cord and the connector on the control board (CN67 on the LK-1900A INT board). If the code stays, the fault is usually in the control boxes, PCBs and sensors.
Which JUKI machines show E302?
In the manuals we have read, E302 appears on 910N, AMS-210E, AMS-210EN, AMS-221EN, DDL-8700B, DDL-9000CF, DDL-9000CS, DDL-900A, DLU-5494N, DP-2100 and other models.